Linux系统如何通过手机GPRS功能无线上网
时间:03-10 16:21 阅读:3646次
*温馨提示:点击图片可以放大观看高清大图
简介:Linux系统如何通过手机GPRS功能无线上网
首先,要有一台具备GPRS且带有modem功能的手机,以下以palm treo 650为例。
650是不带modem功能,要通过软件实现,下载 USB modem软件并安装在650上。该软件支持蓝牙和usb数据线两种模式!
下面首先看系统是否能检测到modem

如果出现以下信息则能检测modem且将配置自动写入 /etc/wvdial.conf文件。你modem的设备文件为/dev/ttyACM0
由于配置文件为普通拨号而建立,所以不适合grps拨号,要作以下修改

保存后,使用wvdial拨号

使用超级用户操作,不然无法会提示设备忙,或更改用户权限。

到如已经成功啦!我们再来看看路由表

因为我这里还连接到无线网络,所以默认网关是 192.168.0.1,如果只有GPRS拨号连接,则信息会是:

此时,只需设置代理即可以上网了 代理为 10.0.0.172:80
由于移动限制了浏览器,必须要将浏览器头信息更改才能正常上网。不过已经可以上Q。MSN等聊天工具啦!!