1.在线调试时使用的*.out文件放在SRAM中，所以使用的CMD文件为SRAM.cmd，调用的库为rts2800.lib

烧入flash中使用的CMD文件为FLASH.cmd，调用的库为rts2800_fl.lib 

2.打开F28xx on-chip flash programer.进行设置：flash programer Settings中选择flashapi文件 

3.点击Execute Operation 执行。 

**** Begin Erase/Program/Verify Operation. ***

Erase/Program/Verify Operation in progress...

Erase operation in progress...

Erase operation was successful.

Program operation in progress...

Program operation was successful.

Verify operation in progress...

Verify operation successful.

Erase/Program/Verify Operation succeeded

**** End Erase/Program/Verify Operation. *** 

4.拔掉电源，拔掉仿真器，重新通上电源，程序即可执行。